Forums/
Wi-Fi Routers
2020-05-16 11:26:41
Sounds like you created a double NAT condition. Google Double NAT for more info and ways to resolve as those links can explain it better than I could here.
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-15 11:48:58
Bypass the router and connect a PC direct to the modem being sure to use a good Ethernet cable. Power cycle the PC and modem. Test your connection. If you have an issue, it is not the router. Try a...
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-13 20:35:09
In my house with an Archer C8 V1 using Comcast (Xfinity) Blast 200 service, I can get over 200 on WIFI 5GHz in line of sight 10 feet or so, On the 2.4 I never get that high. Just ran a test with my...
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-13 19:21:27
Bypass the router and connect a PC direct to the modem and run a bunch of speed tests. If it is not what you should have from the ISP, contact them and get that resolved first. Then connect the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-13 19:11:58
The 2.4GHz will give you more distance. The 5GHz will give you more speed. Depending on your area, selecting a different channel may be better and depending on your devices a different channel width...
0HELPFULS
Forums/
Wi-Fi Routers
2020-05-12 11:28:44
I do not think that would work with both routers set up in router mode unless you were to treat it like you were going to link from outside of your network such as remote desktop.
0HELPFULS