Forums/
Wi-Fi Routers
2020-04-30 14:14:05
Sign on to your router, go to advance settings, then to the forwarding section, then to Virtual Servers then add you ports. Your User Interface may be a bit different but you are looking for the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-04-30 14:05:28
Firmware in most cases can be downgraded provided you use the same model, same Hardware version and location of the firmware. Assuming you have an A6 Version 2, for the US market, there is only three...
1HELPFULS
Forums/
Wi-Fi Routers
2020-04-30 13:45:00
You do not need to be hooked up to the internet to get to the UI of the router. Plug in the Ethernet cable between the router and the PC. Then log on to the router using the IP address of the router...
1HELPFULS
Forums/
Wi-Fi Routers
2020-04-28 14:56:25
Router location is very important. Small changes make a difference. Higher, lower, direction facing, moving it left or right, and position of the antennas. The 2.4 GHz will give you more distance and...
1HELPFULS
Forums/
Wi-Fi Routers
2020-04-28 14:47:08
The first post says that you named then the same. I assume you mean the WIFIs have the same SSIDs and password. If so, how do you know the WIFI you are getting is from the A6 and not the other...
0HELPFULS
Forums/
Wi-Fi Routers
2020-04-28 12:20:46
Best you can do is put two computers side by side with a router attached to each. Then go through the settings, especially good is you have reserved addresses, port forwarding, and such where you...
1HELPFULS