Forums/
Wi-Fi Routers
2024-07-28 00:25:02
@rctp Be sure the firmware is up to date in the router. I would suspect the Ethernet cable but you said you changed it. Look at the modem connection and ensure no bent pins in the connector. power...
1HELPFULS
Forums/
Wi-Fi Routers
2024-07-25 19:03:59
@Greeny96 I would keep them different as the wider the band the more likely you get interference. As far as channel selection, it depends on other networks in the area. If auto works fine then stay...
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-24 22:52:24
@rctp Check to see if you have it turned off Go to advance settings then system, then led control.
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-24 00:55:25
@Marshmutt See user manual and the connections, hot spot mode.
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-21 23:43:40
@KcPele Did you set up address reservation for the device you want to port forward so the ip stays the same?
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-21 23:37:13
@nfamos1 I would look at the router and modem logs. See if you can establish a time. Also consider that it might be the isp, modem, or even your electric power that is the issue. Be sure the firmware...
0HELPFULS