Forums/
Range Extenders
2020-02-03 18:10:31
@AkaMrBill The RE220 may be the one with the older firmware that does not have OneMesh since the router was recently updated. Here is a link to the firmware:...
0HELPFULS
Forums/
Kasa Smart Bulbs
2020-02-03 18:03:38
@qarawol Unfortunately, we do not have anyting in the works for canless LED lighting. What you bring up is a good point. I will definatley forward that feedback to our devs.
3HELPFULS
Forums/
Deco
2020-02-03 17:53:22
@Nybblet You are using the RE300 believing it is made to work in conjuction with the Deco mesh which is incorrect. The RE300 would be used with a OneMesh router such as the Archer A7. In your case...
0HELPFULS
Forums/
Wi-Fi Routers
2020-02-03 17:47:34
@sawthelight Since you arleady tried factory resetting, one other thing you can do is to manually upload the latest firmware on the router as it might have gotten corrupt. If that still does not...
0HELPFULS
Forums/
Wi-Fi Routers
2020-02-03 17:45:05
@mouskowitz Go to Advanced > QoS > Application Priority, make sure Standard is chosen. Go to Advanced > System Tools > System Parameters (bottom left), disable "Enable WMM". Finally, while still at...
0HELPFULS
Forums/
Deco
2020-02-03 17:37:59
@thinktank Here is a guide I found for your printer on setting it up via Wi-Fi: https://help.brother-usa.com/app/answers/detail/a_id/69940/~/wireless-setup---using-the-control-panel
0HELPFULS