@chipsandsalsa chipsandsalsa wrote Thanks for the response. I've enabled smart connect on my new ax3000 but I am having issues with 5ghz devices attempting to connect when they are too far away from...

@xiDani Do you have Smart Connect enabled? That is both bands use the same SSID or individual SSID's for each band? If Smart Connect is enabled you have no real control where the device will connect...

@xiDani This is what I get on my iPhone: Can you verify that you are on the 5Ghz SSID? I tested with 2.4Ghz and got close to what you are seeing?

@xiDani Don't know what to tell you? I have 400Mbps service, and my ISP over-provisions it to about 480Mbps. This is what my Settings look like for Wireless: See if your settings are the same? I...

@xiDani Have you tried 'forgetting' the Network Connection? Especially if you are using the SAME SSID as the old router. It is possible some data from the old connection is saved? How to do that...

@Riley_S Right, I turned it off so long ago I forgot about it? On my AX55 there IS in Advanced a ONEMESH selection. I wouldn't call that very clear that it disables it though? I turned it on, and...