Forums/
Wi-Fi Routers
2023-04-24 00:05:35
@Davo-IL Here's how to configure RE in AP mode. " I thought the RJ-45 Jack was for output to connect something by wire in addition to wi-fi. " - yes, it is when you use it in a "range extender mode"....
1HELPFULS
Forums/
Wi-Fi Routers
2023-04-23 15:30:26
@Davo-IL In Case 2 of the guide I posted the connection should be: Primary router LAN port => Secondary router LAN port. But keep in mind that this is for wireless routers that don't have dedicated...
1HELPFULS
Forums/
SOHO Switches
2023-04-22 11:33:54
@BillyP For running TP-SG108 which is a gigabit switch an ethernet cable of CAT 5e/6 will suffice - you won't lose any speed. Male to Male receptacles can be standard RG-45s of a good quality. The...
2HELPFULS
Forums/
Wi-Fi Routers
2023-04-21 23:01:18
@Davo-IL If you want all you devices to be on the same subnet then you have to configure the secondary router in AP mode. Thus you'll get all 4 LAN ports and Wi-Fi on the second router to put your...
3HELPFULS
Forums/
Wi-Fi Routers
2023-04-21 22:49:59
@mikehorb In such cases usually changing the ethernet cable resolves the issue - a good quality CAT 5e/6 would suffice. Here's a thread describing the troubleshooting process for this kind of issues.
3HELPFULS
Forums/
Wi-Fi Routers
2023-04-09 08:01:47
@Mimitu Probably your iPhone considers the router's wireless signal still strong enough to move its connection to the access point. In that case you can lower the router's transmission power, but...
1HELPFULS