Forums/
Wi-Fi Routers
2 hours ago
@anymuon If your AXE5400is in router mode, you don't have to switch AX1500 in AP mode to connect to it. Just reset the AX1500 to its factory settings and use the WPS method to build the Easymesh...
0HELPFULS
Forums/
Wi-Fi Routers
Saturday
@Max3 Disable Access control feature if you are not using to restrict a particular devices from your network. On your mobile Disable Adaptive Connectivity: Go to Settings > Network & internet >...
2HELPFULS
Forums/
Wi-Fi Routers
Friday
@cojobe By the way, if you're using same SSID name for the 2.4 and 5GHz band, you can just enable Smart Connnect feature. I woud use the Name1 for 2.4 GHz and Name2 for 5GHz SSID on both devices, to...
0HELPFULS
Forums/
Wi-Fi Routers
Thursday
@Neil154 Refer to this thread regarding multiple HDD connected trhough a USB hub. Here's a video in which the user connects two HDD in RAID 1 to his TP-Link router. If you want to maximize the HDD...
0HELPFULS
Forums/
Wi-Fi Routers
a week ago
@daytooner The BE9700 WebGUI may differ from the one you saw in the guide cause different router models have different features and improvements. As per the two WAN ports - you should use one or the...
0HELPFULS
Forums/
Wi-Fi Routers
a week ago
@daytooner In general, what you have to do is: WireGuard requires only one port to be opened, specifically configured for the UDP protocol. The default port is 51820, although any UDP port can be...
0HELPFULS