Forums/
Wi-Fi Routers
2023-08-28 23:51:49
To be able to use RDP on port 3389 there are few conditions that have to be met: 1. WAN IP address of the router should be the same as the one registered in the dyndns dashboard - your public IP...
1HELPFULS
Forums/
Wi-Fi Routers
2023-06-30 00:50:04
@SpeakerGuy You probably encountered a LAN negotiation issue, try the below suggestions: 1. Login to the web UI of the Archer AX1500 and go to the Basic-Network map page, click the Archer AX1500...
1HELPFULS
Forums/
Wi-Fi Routers
2023-04-24 00:05:35
@Davo-IL Here's how to configure RE in AP mode. " I thought the RJ-45 Jack was for output to connect something by wire in addition to wi-fi. " - yes, it is when you use it in a "range extender mode"....
1HELPFULS
Forums/
Wi-Fi Routers
2023-04-23 15:30:26
@Davo-IL In Case 2 of the guide I posted the connection should be: Primary router LAN port => Secondary router LAN port. But keep in mind that this is for wireless routers that don't have dedicated...
1HELPFULS
Forums/
SOHO Switches
2023-04-22 11:33:54
@BillyP For running TP-SG108 which is a gigabit switch an ethernet cable of CAT 5e/6 will suffice - you won't lose any speed. Male to Male receptacles can be standard RG-45s of a good quality. The...
2HELPFULS
Forums/
Wi-Fi Routers
2023-04-21 23:01:18
@Davo-IL If you want all you devices to be on the same subnet then you have to configure the secondary router in AP mode. Thus you'll get all 4 LAN ports and Wi-Fi on the second router to put your...
3HELPFULS