Forums/
Access Points
2025-02-17 23:53:25
@bitmerlin No, such a feature has to be implemented into the AP's firmware.
0HELPFULS
Forums/
Access Points
2025-02-17 23:51:35
@Airborne2 Reset the AP by pressing the reset button for about 10 seconds. Then connect to its wireless SSID and direct a browser to its default IP address - 192.168.0.254. You may watch this video...
0HELPFULS
Forums/
Range Extenders
2025-02-17 23:37:17
@tomboc Using Nighthawk app you should be able to connect the RE to Deco X55. Most probbaly its mesh is not compatible with Deco mesh but it should work as a regular extender.
1HELPFULS
Forums/
Range Extenders
2025-02-17 23:35:04
@Andalucia Update your RE firmware to the latest release from here and test again.
0HELPFULS
Forums/
Access Points
2025-02-17 23:23:54
@Smakmauz You can run an ethernet cable to an EAP650 and set its SSID the same as in your AX55. This won't be a mesh network but your device would decide to where it should connect (AX55 or EAP650)...
1HELPFULS
Forums/
Range Extenders
2025-02-17 23:07:46
@User2025 Yes you can do that - using the RE 5GHz band as a wireless backhaul to your router and extend the wireless coverage over its 2.4 GHz band. Some RE models have a dedicated feature, which...
0HELPFULS