Forums/
Wi-Fi Routers
2024-12-06 21:11:05
@Razorek Use this guide for building an etehrnet backhaul between those two. According to this thread both your router should support Easymesh ethernet backhaul. If you still can get ethernet...
0HELPFULS
Forums/
Wi-Fi Routers
2024-12-04 19:08:42
@ThisisJ The only way to remove this limit is with an updated FW release. Updated FW release could be issued only if it complies with the device HW limitations (CPU and Memory). That's TP-Link...
0HELPFULS
Forums/
Wi-Fi Routers
2024-11-27 01:08:08
@FrakeTrain "TP-Link Smart Connect allows the router to automatically assign connected devices to the Wi-Fi band that provides the fastest speed. By balancing the load and assigning devices to the...
0HELPFULS
Forums/
SOHO Switches
2024-11-19 20:31:19
@EnGarde Here's the configuration guide for LAG (page 28) on easy smart switches. Keep in mind that this is a static LAG (not an LACP). You need to mind two things: Ffirst - both side need to support...
0HELPFULS
Forums/
Range Extenders
2024-11-11 00:33:49
@scottb To reset the RE successfully, press and hold its reset button for about 10 seconds. What you've described seems like a boot loop and most probably the RE is defective.
0HELPFULS