Forums/
Wi-Fi Routers
2024-07-27 12:44:08
@jgb77 In your case you have to use client mode - here's a guide on how to do that. Thea are two options: 1. Leave the TL-WR802N network IP address as Smart IP (DHCP) and access teh devices via...
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-23 23:41:10
@Neuf512 You can test these wireless security settings in your case:
1HELPFULS
Forums/
Wi-Fi Routers
2024-07-23 16:24:04
@Jackeg Check your primary Deco unit bottom sticker for the FW region and HW version - If it's Deco M5 the latest FW release should be v1.7.4 - check this thread for details.
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-23 10:53:42
@CelestialVeil The router is not meant to be managed by a telnet connection. If you put an outdated FW on the device it can become vulnerable to other exploits as well. On top of that some new FW...
0HELPFULS
Forums/
Range Extenders
2024-07-17 10:15:39
@RequiredAlias To be easier for you to measure the signal strength I would recommend to set a different SSIDs on the RE315 (SSID_name_EXT for example). Then you should be able to check the signal...
0HELPFULS
Forums/
Wi-Fi Routers
2024-07-14 11:28:49
@computergamer55 Since you can't select only 80Mhz channel width, keep your current setting of "20MHZ / 40MHZ / 80MHZ". It should be an equivalent of the Auto setting in other FW releases. Here's a...
0HELPFULS