Forums/
Wi-Fi Routers
2024-05-16 21:06:36
@Garcia82 Here's the tipical usage of Link Aggregation feature. You can't use this feature with an unmanaged switch.
0HELPFULS
Forums/
Wi-Fi Routers
2024-05-16 21:03:31
@AKsteve Ethernet ports (LAN2 and LAN3) should be greyed out when nothing is connected to these ports. Try to plug a devices like a laptop or a PC/Mac and check their status again.
0HELPFULS
Forums/
Wi-Fi Routers
2024-05-14 22:53:22
@dfcs You can't use MR600 to build Onemesh with another wireless router - check Onemesh FAQ - Q10/A10.
3HELPFULS
Forums/
Deco
2024-05-13 20:02:11
@MichaelSTL I don't know what pass-through mode is in ATT router but the general considerations should be: If your ISP router is in bridge (modem only) mode the Deco should be in router mode. In this...
0HELPFULS
Forums/
Range Extenders
2024-05-13 16:25:36
@vbPhil In the thread I posted the OP is using RE220 ethernet port in RE mode for connecting a wired device. Did you try another ethernet cable as I suggested ? If nothing helps contact your retailer...
0HELPFULS
Forums/
Range Extenders
2024-05-13 15:17:35
@vbPhil A way to be sure that RE ethernet port is working properly is to switch the RE in AP mode and test the behaviour. Change the ethernet cable that you're using - use the cable from the RE kit...
0HELPFULS