3072308

EngiBeer wrote

... Could you confirm that when v2 hardware exists with solutions to these issues, I'll be able to exchange all my v1 kits?  ...

Great question, would be great to confirm. I have 1 set installed which I'd want to replace and could use 2 more.

I haven't posted in a while and thought I'd give an update.  Firmware v1.0.10 has been very stable and I haven't had any connectivity issues since upgrading from v1.0.9.  I did have a major issue yesterday, however. Nearly all of my HS220 switches and four or five Kasa plugs reset on their own.  None of my Kasa bulbs or the KS230 kit were affected.  I was using the latest Kasa app to provision a previously used Kasa plug.  That went well, but I noticed an hour or so later that most of my lights were at full brightness and all lights that were at full brightness had Kasa switches or plugs that were flashing between a green and orange Wi-Fi indicator.  I tried everything to try to get them to reconnect including restarting WiFi and restarting the switches.  Nothing worked and I finally had to reprovision all of them from the Kasa app including the device name and all the presets and advanced features.  It was a ton of fun on my Sunday afternoon.  WTF? 

It took hours to clean things up.  Mercifully, I found that once they were renamed the same as before, they started working in Alexa without any reinstallation there necessary.  This even worked when I gave them temporary names to begin with since I didn't want to take more time to match MAC numbers on the physical switches to those in the app to be sure where each newly provisioned switch was.  This allowed me to turn lights on and off to locate a switch before renaming it to the previous Kasa and Alexa device name.

Has anyone else had this happen?  @Carl, any ideas?

@Connu 

No issues with our numerous bulbs, plugs, and switches either.

Thanks @titanvex and @Carl.

It hadn't occurred to me that it could have been something on the cloud side of things that might have happened to others.  It seemed to me that something went wrong using the Kasa app to provision the HS103 plug.  I thought the plug was provisioned but it kept flashing blue and orange.  I suspect that's also when the other plugs and switches also started flashing green/blue and orange, but I didn't notice right away.  I have a lot of Wi-Fi devices including Lutron switches, 6 Google Wi-Fi mesh routers, a couple of Roombas, 3 Tailwind garage door controllers, several Ecobee thermostats, laptops, phones, and a bunch of other stuff.  Nothing else reset or disconnected from Wi-Fi or the Internet and Alexa didn't report any issues other than the Kasa devices becoming unresponsive.  Something went very wrong with the Kasa app device provisioning.  I have 48 Kasa devices installed.  Is there a limit to the number of devices Kasa or the Kasa app can handle?  I have an HS220 to install and I'm a bit gun-shy.  I'll keep you posted.

@Carl  Is version 2 roadmap still alive and well given the reports that TP Link has discontinued the Kasa line in the UK? I have over 50 Kasa devices installed in my home and really want a good working 3-way dimmer, but am afraid if the line is discontinued in the US, then it's just going to be money down the drain. Any ideas about what's happening in regards to the discontinuation of Kasa outside the US? Will the Kasa app be supported afterwards or will there be a viable solution for those of us who already have so many devices?

@Carl 

Thanks for the additional data.

Can you tell us when the KS230 v2 hardware will be made available please?

Thanks,

Bill Suarez

@Carl Any word on launch dates for V2 KS230? Also, any plans for a 4-way dimmer product?