Motion Sensor on the KS220M Does Not Appear to Work Properly

Motion Sensor on the KS220M Does Not Appear to Work Properly

Motion Sensor on the KS220M Does Not Appear to Work Properly
Motion Sensor on the KS220M Does Not Appear to Work Properly
2021-08-11 22:28:12 - last edited 2021-08-16 21:36:53
Model: KS220M  
Hardware Version:
Firmware Version:

We have seen some recent feedback regarding the KS220M's motion sensor feature.  To help combat this feedback we have created a new knowledge base article which can be found here:  Should you have any concerns with the KS220M's motion sensor that this article does not address or if the steps in this guide do not resolve the concern please let us know by replying to this post and Tagging @Carl or @Ryan  and we wiill review your  feedback to further provide assistance. If you have any questions or concerns that do not deal with the KS220M's motion sensor please create a new thread and let us know. 

 

 

  0      
  0      
#1
Options
6 Reply
Re:Motion Sensor on the KS220M Does Not Appear to Work Properly
2021-11-16 00:50:32 - last edited 2021-11-16 01:36:41

 

@Carl@Ryan Important!
I have very positive experience with HS220, so based on feedbacks I decided to run a big project with KS220M (HW 1.0 and FW 1.0.4) and I got myself in trouble. There is two major issues which both don't allow me to proceed with project:
1. HS220 has a nice double tap and 2sec tap features to put lights 100% brightness from off state or from dimmed state - it doesn't work on KS220M. I don't believe you don't have such a nice feature consistent within the line of your products

2. KS220M when it runs on Smart Control Rule with, let say 10% brightness, and you want manually to increase brightness to 100%, as soon as you start moving brightness is reset to 10% - this is an epic failure.

3. There is no Sunrise/Sunset option for Smart control timings as well as timings can't be overlapped, so no fix can be done on that side as well.
4. Also client wants possibility to disable, at least temporally, Smart control motion activated action from switch and not from app - let say, for example, by 2s tap on switch in on position
5. We need motion action reports and motion related automation for other devices.

I stay now with the option to return merchandise back to supplier. Do you have any suggestions?

Note: No issues with sensor so far.

  0  
  0  
#2
Options
Re:Motion Sensor on the KS220M Does Not Appear to Work Properly
2021-11-18 01:52:16

@Yokushka 

 

Let me review these concerns with the development team and I will get back to you.  

  0  
  0  
#3
Options
Re:Motion Sensor on the KS220M Does Not Appear to Work Properly
2021-11-18 02:33:35

@Yokushka @Carl 

We had a discussion for the above concerns on another thread here: 

https://community.tp-link.com/en/smart-home/forum/topic/509602?replyId=1016934

 

  2  
  2  
#4
Options
Re:Motion Sensor on the KS220M Does Not Appear to Work Properly
2022-04-02 02:40:19

  @Carl / @Ryan 

 

I have an ES20M and the motion activation is not working.  I have the latest firmware and I have verified the configuration with the link to the setup you shared.  

I have nearly 50 TP Link devices, and love them all.  But this one is frustrating me.

File:
Screenshot_20220401-202449_Kasa.jpgDownload
  5  
  5  
#6
Options
Re:Motion Sensor on the KS220M Does Not Appear to Work Properly
2022-04-16 06:13:26

  @IdahoAutomation so I have the same ES20M and I'm getting the exact same problem. I just installed three of them and the motion sense does not seem to work at all. The one that I purchased a couple weeks prior or month prior works perfectly fine and I don't have any issues with that one, but for some reason the three new ones that I bought are having problems and they will not work. The mushroom will not turn the light on no matter how I set it up and I've tried 25 different ways

  5  
  5  
#7
Options
Re:Motion Sensor on the KS220M Does Not Appear to Work Properly
2022-04-18 18:16:47

  @AllenRobberson 

 

The Motion Sensor may need to be configured or at least calibrated.  Please follow this Guide

  0  
  0  
#8
Options