Hi,

I have a Deco AX3000 PoE connected to a TP-Link LS108GP via Cat6 cabling. Power is not being sent to the access point - the power light on the access point never comes on, and the power light for the port on the switch never lights. I've tried:

* Connecting the switch directly to an outlet (as opposed to through a surge protector)

* A different switch (the 5 port model of the same - LS105)

The access point works just fine when powered by the provided DC adapter.

The cable is a 100 foot segment, well under the PoE cable length constraints

Auto Recovery and Extended modes are off on the switch.

I've confirmed that both support the 'at' standard of the PoE spec.

Any thoughts would be appreciated.

Thanks!a