Harley75LV1Online
Following: 0Followers: 5
Forums/ Kasa Smart Bulbs
2021-03-18 16:35:21
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.
@B.Will I ran a test using an appropriate preset selecting "Use A Preset" instead of "Turn On" and that fixed the issue. The KL130 that I manually turned on stayed on with the expected brightness as...
0KUDOS
Forums/ Kasa Smart Bulbs
2021-03-18 16:22:02
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.
@B.Will The schedule is configured to "Turn On", not "Use A Preset". Works as one would expect if lamps are off. I thought the "Default States" were in play for the "scheduled on", using default...
0KUDOS
Forums/ Kasa Smart Bulbs
2021-03-18 14:22:51
KL130 scheduled turns on at 0 brightness if KL130 was already on.
I have 2 KL130 bulbs in use. They are scheduled to turn on and off once a day. If I turn on these bulbs ahead of the "scheduled on" time, when the "scheduled on" time hits, the brightness changes to...
0KUDOS
Forums/ Kasa Smart Plugs
2021-02-03 20:58:46
Create a "Schedule" and assign devices
This is a feature suggestion ... I deployed a number of Kasa Smart Switches, Light Bulbs, and Wall Switches. I would like to see a feature where you setup a "schedule" and assign devices. Instead of...
0KUDOS
Forums/ Wi-Fi Routers
2021-01-29 16:29:07
Re:AX3200 very sluggish with WIFI enabled
Update: I started over with this new AX3200. Did a factory reset to start as out of the box. Stepped through my setup that included changing the LAN IP and modifying the DHCP pool. I left the WIFI...
0KUDOS
Forums/ Wi-Fi Routers
2021-01-29 00:59:41
Re:AX3200 very sluggish with WIFI enabled
@Tony Thank you for responding .... The 6 devices connecting on the 2.4Ghz require 2.4Ghz. Several devices are the TP-Link/Kasa switches etc that only work on 2.4Ghz. After pondering the situation I...
0KUDOS
12