Forums/
Deco
6 hours ago
@Jamval Thanks for the replies. Initially I used the following settings: Connection Type: Dynamic Get IPv6 Address: auto Prefix Delegation: enabled DNS Address: Auto Assigned Type: DHCPv6 I rebooted...
0HELPFULS
Forums/
Deco
Thursday
Has anyone, with Spectrum as their ISP, successfully set a Deco x20 Mesh system up for Dual Stack IPv4/IPv6? If so what IPv6 settings should be selected? My Deco default settings are for IPv4 only. I...
0HELPFULS
Forums/
Range Extenders
2025-09-25 14:46:58
@jzchen I successfully connected the RE450 using each of the three methods, web browser, Tether app, and WPS button. And yes I did have to individually set up the connection to the 2.4 and 5 Ghz...
0HELPFULS
Forums/
Range Extenders
2025-09-19 01:14:45
@jzchen So far I've been only trying wifi connection. The next thing I was going to try is what you're suggesting, connecting ethernet cable from my main deco x20 to the extender. And setting...
0HELPFULS
Forums/
Range Extenders
2025-09-18 22:56:33
@jzchen I should have mentioned that I already tried both of your suggestions. I opened the Deco app and found the IP address assigned to the RE450 and entered that in my web browser. I tried this...
0HELPFULS
Forums/
Range Extenders
2025-09-18 17:10:59
I have made three attempts to setup a RE450 extender using the 3 available methods. 1. Using a Web Browser. 2. Using WPS button. 3. Using 'Tether' app. All three methods work at getting the RE450...
0HELPFULS