Forums/
Wi-Fi Routers
2019-06-21 17:40:26
@gskidmark Traffic statistics will give you the data you are looking for based on IP/MAC so you will need to knwo that about your network devices. Also NAT Boost cannot be enabled when Traffic...
0HELPFULS
Forums/
Kasa Smart Plugs
2019-06-21 17:36:50
@MarkDC Not at this time but if are devices become able to be triggers on IFTTT then yes it would be possible. Because then you could say If Smart Plug loses power send an email to this address, or...
0HELPFULS
Forums/
Wi-Fi Routers
2019-06-19 00:16:30
@Leftysgirl !00% packet loss means every packet of data to and from the Xbox fails to be delivered. Likely what you need to do is setup port forwarding. You will need to know what ports Xbox needs...
0HELPFULS
Forums/
Kasa Cameras
2019-06-18 22:26:40
@Ksable Theroretically it should work, however there are a few factors to consider. 1. The network must be a secure. The camera will not connect to an open network. 2. The signal stregnth needs to be...
0HELPFULS
Forums/
Kasa Smart Plugs
2019-06-18 16:58:45
@PerryO Amber lights on the smart plug can mean a few things. Flashing amber rapidly: Factory resetting. Solid amber: Initializing, rebooting, or no network connection If its is blinking amber this...
0HELPFULS
Forums/
Deco
2019-06-18 16:52:19
@KingpenM3 You are correct. The Deco's can only detect one provider as the source. trying to connect a 2nd provider in would deffianlty cause network issues and should be avoided.
0HELPFULS