Forums/
Deco
2021-01-28 21:53:58
@Robert_01 Disconnect the issue Deco from the wired network and take it to the main Deco, just power it on, nothing wired. Once the Deco boots up, reset it by holding the reset for 1 second. If it...
6HELPFULS
Forums/
Wi-Fi Routers
2021-01-28 21:29:54
@callie468 If you happen to have another device you can use zoom with test that to see if the issue stays on your device being used. Make sure your A7 does not have the same name for the 2.4G and 5G,...
0HELPFULS
Forums/
Wi-Fi Routers
2021-01-28 21:27:44
@Harley75 If you split the devices, some on the 2.4G and some on the 5G are you seeing the same thing? Where there any other settings enabled/changed other than changing the SSIDs?
0HELPFULS
Forums/
Cable Modem&Routers
2021-01-28 21:00:24
@Maximus2020 Since it is Kilobits, try setting the upstream and downstream to 999999.
0HELPFULS
Forums/
Range Extenders
2021-01-28 20:48:36
@Janice123 You need to connect the second extender to the router too, not to the other extender. I would use Tether to set it up: https://www.tp-link.com/us/support/faq/1373/
3HELPFULS
Forums/
Cable Modem&Routers
2021-01-28 20:47:30
@Almi You could try setting the Cisco device (assuming it has a static IP) as a DMZ to see if something may be getting blocked causing an issue. (Archer AX21, Advanced > NAT Forwarding > DMZ)
0HELPFULS