Forums/
Wi-Fi Routers
2020-12-17 19:14:13
@DanTheMan827 Thank you for the feature request.
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-17 18:53:09
@DanTheMan827 You could try setting the IP address on the device itself which the router should be able to communicate with if the information is correct. Alternatively, you could also try setting...
0HELPFULS
Forums/
Kasa Smart Plugs
2020-12-17 18:37:41
@cjb As you are going through the setup, and get hit with the error message of "Something went wrong..." go back to the phone's available Wi-Fi list, and connect back to the smart device, then you...
0HELPFULS
Forums/
Range Extenders
2020-12-17 00:03:16
@SoundMaker I would expect the CPE to be stronger since it is a directional signal compared to the omnidirectional signal from the hub. You mentioned a unique SSID for the CPE so the networks are not...
0HELPFULS
Forums/
Deco
2020-12-16 23:55:22
@Gabebalazs I would check the firmware to make sure it is up to date. should be higher than 1.4.x.
0HELPFULS
Stories/
Home Network Community
2020-12-16 23:45:48
@saeideh If the device is not powering on that sounds like it may be malfunctioned out of the box. @PRS_Chicago The RE450 does not have OneMesh firmware so you can't create the OneMesh network. You...
0HELPFULS