Forums/
Deco
2020-12-16 21:20:13
@montross-zero Try factory resetting the device and installing it again. If the LED continues to blink red try moving the device closer to the main Deco. The issue may be the M3W is not longer able...
0HELPFULS
Forums/
Adapters
2020-12-16 21:10:31
@siw531 We recommended the x1 slot, but you should also be able to install the card on the x4 slot. However, if the card is not able to be recognized by the computer it will need to be on the x1 slot.
0HELPFULS
Forums/
Deco
2020-12-16 21:09:08
@idlezork Your original plan should work where you use the powerline adapters to help the M9 communicate to the other M9. There are no additional configurations needing to be done, the two nodes will...
1HELPFULS
Forums/
Kasa Smart Switches
2020-12-16 21:07:35
@SavvyGuy There are smart actions that you have available to you here: https://www.tp-link.com/us/support/faq/2567/ You can create schedules to have it set to on in case it was switched off by...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-16 19:54:17
@HANSM Test other devices also connected to the router, if those work the Lennox could possibly being having DNS issues or it has a static IP configured. Try changing the network settings to DHCP.
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-16 19:51:24
@SeamusW Check the LED lights on the range extender to make sure it is successfully connected to the router or anything connected behind the extender will not work.
0HELPFULS