Forums/
Deco
2020-12-14 22:07:53
@FLAdude No matter how many Deco units you have, one of them will at least need to be wired to a device to give wired internet. Since you just want the Deco to extend your current network, set up the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-14 21:26:28
@sunny-bloom2017 What happened is originally the router was in Access Point mode. If you were to go into "Operation Mode", there you would be able to switch to "Router Mode" to get the Advance menu...
0HELPFULS
Forums/
Apps
2020-12-14 21:24:10
@StarCruiser What may need to be done is the Tether app reinstalled, and the router factory reset by holding the reset for 15 seconds.
0HELPFULS
Forums/
Access Points
2020-12-14 19:46:47
@DataConnect You will need to use a wireless router like the Archer C50 that has a wireless schedule, also our wireless powerline adapter as well like the TL-WPA8630 KIT.
0HELPFULS
Forums/
Deco
2020-12-14 19:24:20
@hangpilot After setting up the modem, connect the M5, while the M5 is on, reboot only the modem. Then download the Deco app on your smartphone and set it up from there. The Deco will default to...
0HELPFULS
Forums/
Range Extenders
2020-12-14 19:19:49
@Jeff_R The MAC addresses of the original are likely changed to a different value. What should at least be the same is the first half of the original MAC address.
0HELPFULS