Forums/
Deco
2020-10-26 18:08:22
@jomama341 Have you tried connecting to any of the satellite nodes? In the screenshot referenced does your computer get an IP of 192.168.68.x? Have you tried swapping the main node with one of the...
0HELPFULS
Forums/
Range Extenders
2020-10-26 18:03:26
@Bonz0 If the original signal is weak the range extender will be able to make that signal stronger. The speed, however, may increase from the stronger signal or be slower due to the extender being...
0HELPFULS
Forums/
Deco
2020-10-26 18:00:57
@11April After a recent firmware update, you are not able to connect the second Deco node to the first one? What is the current status of both LED lights, and how are they connected on your network?
0HELPFULS
Forums/
Kasa Smart Bulbs
2020-10-26 17:55:33
@Soop If you look at the power adapter itself it should mention the information you need which should match below. The barrel connector seems to be a standard 2.1mm. Please note using a different...
1HELPFULS
Forums/
Deco
2020-10-26 17:26:35
@muainimh The yellow LED may indicate it is in recovery mode as the reset may have been held for more than 10 seconds. Leave the Deco powered on for several minutes, then hold the reset for one...
0HELPFULS
Forums/
Kasa Smart Switches
2020-10-26 17:22:42
@MARKARTIS If the switch specs are correct (100 - 120VAC 60Hz, Neutral wire) and wiring double-checked, please reach out to our support
0HELPFULS