Forums/
Range Extenders
2020-10-26 16:57:02
@Dr.Rabbit Were all methods tried? https://www.tp-link.com/us/support/faq/2509/ Factory defaulting the extender by holding the reset for 15 seconds while it is plugged in?
0HELPFULS
Forums/
Deco
2020-10-26 16:43:43
@dylanb You generally should not need to do forwarding. Are the three of your phones not able to do any Wi-Fi calling? After forwarding ports for the one phone, does that now work?
0HELPFULS
Forums/
Deco
2020-10-26 16:11:51
@J.petty79 The message came with the new iOS update. If you are running the latest firmware, go to your wireless settings, then tap on the password. You will then see an option for WPA2-PSK [AES]...
1HELPFULS
Forums/
Deco
2020-10-26 16:07:00
@LadefogedT You can try swapping one of the satellite units with the main Deco to see if the main Deco could be giving the slow speeds. I'm assuming the wireless signal is likely just weakening...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-26 16:00:50
@tomscot2 We do not have a document that describes each one, but I would recommend reaching to our support where they can consult higher-level engineers if needed.
0HELPFULS
Knowledge Base/
Troubleshooting
2020-10-26 15:42:01
First, the root cause is that the RE/clients failed to obtain an IP address from the Main router. A static IP and specific DHCP server settings on the extender will sort this out. Note: If you found...
0HELPFULS