Forums/
Range Extenders
2020-08-17 22:03:59
@Egbar What you can do is to have the extender scan for the wireless networks, and pick the node that is closest by referencing the MAC address. That way you pick the closest node. The MAC addresses...
0HELPFULS
Forums/
Range Extenders
2020-08-17 22:01:52
@Connf If the extender is able to see other 2.4Ghz networks, then try setting a specific channel on the router (any), and rescan. If the extender is not able to see any 2.4GHz at all, try using a...
0HELPFULS
Forums/
Kasa Smart Switches
2020-08-17 22:00:03
@PeterS16 When the app says it is not reachable are you able to still physically press the switch and does that work fine? What is the status of the Wi-Fi LED light?
0HELPFULS
Forums/
Deco
2020-08-17 21:55:33
@stephenn5788 Not sure about the "code"? In any case, what is known to happen is if the internet on the Deco cuts out (modem blows up). The Deco will then not know what do really do or what is now...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-17 21:51:14
@network-walker It looks like the TL-WR841N is also able to do the hotspot mode as well. You can go with either one really, but I would probably go for the TL-WR902AC, of the two it was the last...
0HELPFULS
Forums/
Range Extenders
2020-08-17 21:37:02
@Ziphammer83 There does not appear to be a firmware recovery method. Plug the range extender into a different outlet, wait for it to boot fully, then hold the reset pinhole for 15 seconds. If the LED...
0HELPFULS