Forums/
Kasa Cameras
2021-03-25 16:56:42
@Lawrence01 Boot the camera up, then once the LED starts going amber/green, hold the reset button for 20 seconds. This will do a full reset rather than just resetting the Wi-Fi settings. Verify the...
1HELPFULS
Forums/
Kasa Smart Plugs
2021-03-25 16:53:17
@littleneil The Apple device may be automatically switching over to your Wi-Fi network, as you do the setup check your Wi-Fi to make sure you are still connected to the plug. If you happen to have...
0HELPFULS
Forums/
Kasa Smart Switches
2021-03-25 16:51:30
@JohnC1701 This was seen on an HS200 where the HS200 was installed on the neutral wire instead of the Live wire, and the bulb was installed on the Live wire. When HS200 was off, only the neutral was...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 23:19:21
@marapavelka Set the NAS IP as the DMZ, just as a test, then test the port to see if they are still closed. If so, something else may be getting in the way. If they do open, try changing the ports...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 23:17:25
@Coach-D Unfortunately, the USB printing feature was removed with the newer firmware releases. You can downgrade the firmware of the Archer A7 to the build where it did have the function by...
0HELPFULS
Forums/
Deco
2021-03-24 23:07:47
@Al_Borges Here is the firmware you can upload to get the UPNP option like you mentioned is there for the other units: Deco X20/X60/W3600 V1:...
1HELPFULS