Forums/
Wi-Fi Routers
2021-03-24 23:04:54
@vskus In router 2 configure a port forwarding rule for IP 192.168.2.101 for whichever port that IP uses depending on the service: https://www.tp-link.com/us/support/faq/1541/ So say for example I...
1HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 22:51:58
@Mister_K When experiencing the Wi-Fi slowdown, were the various eight devices disconnected to see if the speed returns? Or the router rebooted, and tested with one device? You can potentially try...
0HELPFULS
Forums/
Deco
2021-03-24 22:25:44
@CappuccinoKid If the Deco served as your main router, then anything wired to any of the satellite nodes would be seen on the network or on the app with the exception of devices that have a...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 22:07:01
Rikus3 wrote Will the AX50 get the WPA3/OneMesh update YES or NO No
1HELPFULS
Forums/
Deco
2021-03-24 22:04:04
@myrlin Correct, you would use a network switch to connect to one of the ports of the Deco, from there you can wire any other device to the switch. We have found some D-Link switches have issues...
1HELPFULS
Forums/
Deco
2021-03-24 21:57:33
@kunatir If you want everything to be one network, set the S4 into access point mode. This loses the router features of the S4, but you have your one network. You can leave the S4 in router mode if...
0HELPFULS