Forums/
Range Extenders
2020-07-16 22:59:53
@ThisDeviceSucks Here is a very easy video to follow: https://youtu.be/oolmHBv7id8
1HELPFULS
Forums/
Wi-Fi Routers
2020-07-16 22:54:57
@John20 The printer may have different network settings then the router. For example, the printer may be configured for 192.168.1.10 while the router is on 192.168.0.x. Make sure your printer's...
0HELPFULS
Forums/
Wi-Fi Routers
2020-07-16 22:45:10
@angryCOMMguy If you go to router mode, disable the PIN, and make sure the wizard is set to button push, then switch to AP Mode, you are still able to connect to the A7 with the PIN? Make sure the...
0HELPFULS
Forums/
Deco
2020-07-16 22:37:25
@ycheon It looks like you did most of what you could try. What I would probably test or try is to create a new Deco network with just that one node. If the node works fine, reset the other nodes, and...
0HELPFULS
Forums/
Wi-Fi Routers
2020-07-16 21:28:26
@Samantha15 If you go to Advanced > Security > Access Control, you can blacklist the MAC address of the device or create a whitelist.
0HELPFULS
Forums/
Range Extenders
2020-07-16 18:43:09
Re:Was trying to switch to a new network, but now I can no longer access the extender network at all
@muellka2 Factory default the extender to get it to a state of installing it for the first time. To do that hold the reset pinhole while it is plugged in for 15 seconds. You should now be able to...
0HELPFULS