Forums/
Wi-Fi Routers
2020-06-30 22:35:42
@Shootlessjoe The issue is that the drivers your wireless card has does not work with AX networks. You must update the drivers on your laptop, once you do that you will see the AX networks. Another...
3HELPFULS
Forums/
Wi-Fi Routers
2020-06-30 22:33:37
@randomactions Smart Connect allows each of the router’s wireless bands to use the same wireless settings. The router can balance network demand and assign devices to the optimum band. Your mobile...
2HELPFULS
Forums/
Adapters
2020-06-30 21:44:34
@Tracy4488 When you first boot up an extender it just broadcasts its own network and does not have a password. When you set up the extender with your router you can configure what you want the...
0HELPFULS
Forums/
Deco
2020-06-30 21:43:09
@PimG I would factory reset the main system and all the other Deco nodes, then set up the mesh system again. I have seen that work for some users to start showing connected devices again.
0HELPFULS
Forums/
Deco
2020-06-30 21:39:26
@Lucaspty Factory reset each of the Deco units you are not able to add. If the node pulsates blue, try to add it via the Deco app. If that fails, try to wire the node to a Deco that is on the...
0HELPFULS
Forums/
Deco
2020-06-30 21:30:24
@rnandanrao Unfortunately, if you have clients changing their MAC address then you will need to look at alternative means, the Deco is not able to prevent changing as that is done client-side. Since...
0HELPFULS