Forums/
Wi-Fi Routers
2020-06-24 18:34:45
@LPowell Connect the TP-Link to a router, and boot it up, look in the DHCP server list if the router shows it gave an IP to the TP-Link. When doing a factory reset hold the reset button for 20...
0HELPFULS
Forums/
Deco
2020-06-24 18:16:23
@ikaz1106 If you want to just keep using your existing router with the Deco, set the Deco operation mode to Access Point. The Deco will still provide you a mesh network, but will just work as AP...
14HELPFULS
Forums/
Range Extenders
2020-06-24 18:06:55
@richjb54 As an extender the device will connect to the router wirelessly and broadcast the signal further. In that setting it will run in half-duplex meaning it needs to send the data, then receive...
0HELPFULS
Forums/
Powerline Adapters
2020-06-24 18:04:00
@wellsy37 Correct.
0HELPFULS
Forums/
Deco
2020-06-24 17:44:50
@busybee Switch the Deco to router mode, and test the GUI, just to make sure the computer is capable of getting to the GUI. If not use a smartphone and use the smartphones browser just to test. Focus...
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-24 17:13:35
@KoleH If that is the case, I would focus on the modem and the internet connection. There may be some unstable signal or something going on. If they try to insist on the modem and the internet is...
0HELPFULS