Forums/
Range Extenders
2021-03-05 18:01:59
@tamiwest If you are only dealing with 2.4G then you can potentially look at the EAP110-Outdoor: link
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-05 17:52:53
@Thebloody Other things to potentially try are: -Disable Smart Connect if being used -Change the transmit strength to medium or low for all bands -Disable WMM for all bands (Advanced > System Tools >...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-05 17:30:34
@Steve696 The EAP is only an access point so it will need the AX6000 to provide network connectivity. They are each their own device meaning you will have to manage them independently, but you can...
0HELPFULS
Forums/
Deco
2021-03-05 00:27:29
@Kamui_Amaterasu Here is an article that talks about the differences between router mode and AP mode: https://www.tp-link.com/support/faq/2399/ If you get the extra three you can have just the nodes...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-05 00:21:43
@Gelliott Use the IP of one of your computers as the DMZ so the firewall on the router does not filter any traffic. Then test the VPN connection to see if that works. Disable the DMZ after testing....
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-05 00:06:39
@Wilds48 Please make sure the TP-Link device is running the latest firmware. Log in to the router and if you look on the bottom of the screen see what firmware build you are using. The build is...
0HELPFULS