Forums/
Deco
2019-06-11 18:59:46
@c5bill The Deco M4 does not have a guest option while the Deco is running in AP mode. You will need to switch the Deco back to router mode.
0HELPFULS
Forums/
Kasa Cameras
2019-06-10 23:59:38
@x1818z You can use a USB adapter that is able to provide 5 volts and 1 amp of power, but all adapters are different so make sure it provides that specific amount of power. Some customers reported...
0HELPFULS
Forums/
Wi-Fi Routers
2019-06-10 22:42:55
@JoeG Once the router was updated, how long was the CPU at 90+%? Or how long did you leave the router alone? Did you do a factory default with the new firmware to see if the CPU usage dropped? Were...
0HELPFULS
Forums/
Kasa App and Integrations
2019-06-10 22:33:31
@FloridaPalm When a schedule is configured for the smart plug, it is saved in the device itself. Reconfigure the schedule, see if the issue happens again. If so, log into your Kasa account with...
0HELPFULS
Forums/
Kasa Cameras
2019-06-10 22:03:09
@Mrmrsjsk I would check the signal strength to make sure a weak Wi-Fi signal is not causing it. Do not compare it to other devices that are around it. Go into Kasa, tap on the camera, go to Device...
0HELPFULS
Forums/
Range Extenders
2019-06-10 21:54:26
@MattinNC After you set up the RE350K to connect to the EAPs Wi-Fi what is the color of the 2.4GHz and the 5GHz? If you were to bypass the EAP, and set the extender up directly to the router does...
0HELPFULS