Forums/
Wi-Fi Routers
2025-05-13 15:40:37
@REX33 TL-WR840N has three operation modes - router mode, access point mode, range extender mode and WISP modde. If by bridge mode you mean the access point mode and your router is HW v6 check this...
0HELPFULS
Forums/
Wi-Fi Routers
2025-05-13 15:19:01
@Userlinktp Try the following: Set the main AX80 2.4 GHz band to channel 6. Set one AP 2.4GHz to channel 1 and the other one to channel 11. Set the channel width for all three AX80 to 40MHz and test....
0HELPFULS
Forums/
SOHO Switches
2025-05-09 21:46:12
@UnWired Here are some examples of using the 802.1Q VLAN on TP-Link Easy Smart switches in case you haven't seen them already. Additionally SG-105E/SG108E support a static link aggregation, which can...
0HELPFULS
Forums/
Wi-Fi Routers
2025-05-09 10:35:49
@Betovanbuuren Judging by the final FW release BE900 v2 should have MLO capability - details. " Note: Fixed an auto-reboot bug to improve system stability. Fixed a bug where MLO Wi-Fi clients' TX/RX...
2HELPFULS
Forums/
Wi-Fi Routers
2025-05-08 19:34:09
@Skyliner55 This topology would work for you perfectly if you configure the Archer A9 in AP mode (Case 1) - details. This way both computers would be able to reach your NAS.
1HELPFULS
Forums/
Range Extenders
2025-05-07 22:31:27
@Chimpinnick To determine to which wireless network you're connected at any time, use a different names (SSIDs) for the router and the RE. For example, configure on the router SSID 2.4 and 5 GHz a...
0HELPFULS