Tapo C220 ONVIF/RTSP doesn't work
After updating the firmware on version 1.4.2, the RTSP/ONVIF connection to the camera account does not work, so it is not possible to connect from third-party applications. Plus, the frame rate has been reduced from 30 to 25 fps in the new firmware.
Was this a new firmware upgrade or downgrade? 😖
Is info about the repair of these bugs?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
1. The Tapo C220 with the latest firmware supports RTSP & ONVIF protocols. If you fail to establish the RTSP/ONVIF connection, please follow the instructions below to troubleshoot.
What can I do if fail to stream the Tapo camera via the RTSP/ONVIF protocol?
If the same phenomenon persists, please confirm:
1) The third-party apps you are using (e.g., Agent DVR, VLC).
2) The URL used to stream the camera, such as rtsp://IP Address/stream1(For high-quality stream1).
3) The error message that appears if there is one.
4) Please list the troubleshooting you did and the test results.
2. Please go to the Tapo app > camera's Device Settings > Advanced Settings > Powerline Frequency page and select 60Hz. Then go to the Video & Display > Frame Rate page to see if you can choose 30fps.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
1. The Tapo C220 with the latest firmware supports RTSP & ONVIF protocols. If you fail to establish the RTSP/ONVIF connection, please follow the instructions below to troubleshoot.
What can I do if fail to stream the Tapo camera via the RTSP/ONVIF protocol?
If the same phenomenon persists, please confirm:
1) The third-party apps you are using (e.g., Agent DVR, VLC).
2) The URL used to stream the camera, such as rtsp://IP Address/stream1(For high-quality stream1).
3) The error message that appears if there is one.
4) Please list the troubleshooting you did and the test results.
2. Please go to the Tapo app > camera's Device Settings > Advanced Settings > Powerline Frequency page and select 60Hz. Then go to the Video & Display > Frame Rate page to see if you can choose 30fps.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 355
Replies: 1
Voters 0
No one has voted for it yet.