I have two VLANd setup. Each one works as expected. VLAN 1 (192.168.1.0/24) and VLAN 3 (192.168.3.0/24). I have all of my nodes on VLAN 1 and IP CAMS on VLAN 3. VLAN 1 routes out to my ISP as required

Hi All, we noted that with Omada SDN and Apple Devices with iOS 14 there is a lot of roaming between two neighbor EAP (below you can see 10 roamings in 2 minutes with a stationary client). Topology is

Model : Hardware Version : Not Clear Firmware Version : ISP : Dear Customers, This is the technical support engineer from TP-LINK, we have are summarized some improvements requirements for EAP series

Just updated the OC200 to the new v1.7 firmware Before doing so, it warned me to check compatibility, which i did. I have 3x EAP245 and 1x EAP225-Outdoor. It wanted firmware version: EAP245_V3 2.20.0

Hello I have a problem with my CPE220 wich randomly freeze or the firmware is crashing, at random times, but not too often. I cant connect to it by wifi or lan and the solution is to reboot the CPE. A

on the tab settings > wired networks > LAN there is a subnet that probably cannot be changed? it is 192.168.0.1/24, but i want it to be 192.168.2.1/24. how can i change this? also cannot do controller