Pharos Wireless Bridges
TP-Link Pharos Outdoor CPEs are dedicated to Point-to-(Multi)Point transmission, ideal for short-to-medium range wireless communication among two or more locations. Anything related to Pharos Outdoor CPEs, welcome to ask questions, join discussions and share your experience/knowledge here.
Pharos Wireless Bridges
Hi, I have just installed CPE200 to cover my garden with WiFi. I have specifically bought this router because it should support Passive PoE passthrough on LAN 1 port accordinf to the tech specs. The r
0Helpful
2046Views
Hello I have a problem with my CPE220 wich randomly freeze or the firmware is crashing, at random times, but not too often. I cant connect to it by wifi or lan and the solution is to reboot the CPE. A
By
cristianvdr
· Latest post 2020-10-15 20:46:44
by cristianvdr
0Helpful
2046Views
Hi , i have problem with a cpe 210 A.P . so , when i try to connect the pc , i have error wrong pass , the password is correct of course , ( some device connect well) , others like pc , wifi extender
0Helpful
3921Views
I have two CPE210 devices as a bridge between two buildings, about 125 feet apart. Signal strength on client -40db. SNR 68db. I can run the speedtest tool and get 160 Mbps. One the AP side, on a compu
By
idealtrucks
· Latest post 2020-10-14 12:16:11
by idealtrucks
0Helpful
1702Views
Client end of connection corrupts connection for multiple cameras. Ip 192.168.0.201 works fine 192.168.0.202 or any other connection dissapears when the client is connected to the network. 192.168.0.1
0Helpful
345Views
Here is my setup. I have three wireless access points configured. Arris (cable modem) 192.168.0.1 Hitman (hardwired back to Arris) 10.65.9.1 TP-Link_Outdoor (hardwired back to Arris) 10.10.9.1 Arris a
By
Hitman1965
· Latest post 2020-10-13 03:39:38
by Fae
0Helpful
457Views
Hi, I've put up two CPE 210 to extend my WiFi coverage to an apartment in our barn. The first is configured as an AP and the second I've tried with basically all modes but when I connect to it I get t
0Helpful
420Views
Hi all The descriptions of the modes in the instructions are not clear to me. My attempted installation is as follows. A TP-Link AC-1750 Wifi router serves a number of Smart Switches within it's range
By
Dinosaur1946
· Latest post 2020-10-10 10:02:08
by Dinosaur1946
0Helpful
1454Views
Good afternoon First of all, sorry if my English is not perfect as it isn't my mother tongue. I have bought two TP-link CPE 510 but I can't get them to work as expected. It seems that the AP CPE must
0Helpful
553Views
I am looking for an external wifi bridge to work between 2 buildings about 30m apart. 1 unit would be connected to a modem router and the other to a WAP with 4 ethernet ports which has yet to be purch
By
Deadcanary
· Latest post 2020-10-09 11:24:47
by Fae
0Helpful
419Views