How to reset tp link extender
How to reset tp link extender
![](/avatar/default.png)
I need to reset my extender. Because when I enter the setting its asking me to put a password.I tried to put "admin" for how many times but it says incorrect password. I don't know what to do anymore.Can you tell me how please.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Yomanew If you are facing a problem with reset TP link extender you can try this process press and hold the reset button for 5 sec or until the WiFi LED blinks amber and gree to initiate the app configuration process. To start switch/plug to factory defaults: Press and hold the reset button until the WiFi LED blinks amber rapidly (about 10 sec ) to reset the smart switch to factory defaults.
if you are still facing a problem with the factory reset TP link extender you can follow this process:-
- Make sure the range extender is plugged into a power outlet.
- The power light on the front should be lit solid.
- If the power light is not on, press the power button on the side to turn the device on or the LED button to turn the indicator lights on.
- Locate the pinhole on the side where the reset button is.
- Insert a pin then press and hold the reset button until all indicator lights turn on momentarily.
- The range extender should now be reset to factory default settings.
Hope this will help you to reset the TP-link extender.
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-20.png)
Hello everyone,
Here is a configuration guide and some great tips to help you set up your TP-Link range extender, please give it a try and let us know if it works for you.
TP-Link Range Extender Setup (Range Extender Mode)
Factory Reset Your Extender Before Reinstallation
- RESET: With the extender powered on, use a pin to press the RESET button (pinhole) until all the LEDs flash once.
Related Articles:
Has connected to TP-Link extender but no internet, what can I do?
What should I do if I fail to configure TP-Link Range Extender?
How to place your wireless Range Extender for optimal reception and performance?
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/24762219ab2a420287e7fa8ef3213f1f.jpeg)
Hi,
With the range extender powered on, hold the reset button/hole for 1s to reset it.
Then you can use default login password to login.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
But which one is the default password?
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/24762219ab2a420287e7fa8ef3213f1f.jpeg)
The default login password is admin, which is printed on the bottom label. While the default wifi is open, no password needed.
JuanSarmiento wrote
But which one is the default password?
- Copy Link
- Report Inappropriate Content
Before reset the tp link, you should need to restart the tp link extender. After restart the extender, find the reset key. Push the reset key at least 10 t0 15 minutes with tooth pick or paper clip.
Here you can check the Target Gift Card Balance
- Copy Link
- Report Inappropriate Content
@Kevin_Z still same pr
- Copy Link
- Report Inappropriate Content
Before reset the tp link, you should need to restart the tp link extender. After restart the extender, find the reset key. Push the reset key at least 10 t0 15 minutes with tooth pick or paper clip.
If doesn't work, let me know and I'll try to find another solution.
Thanks,
Umar from https://laptopar.com/
- Copy Link
- Report Inappropriate Content
I solved this by having the range extender powered on, and the I proceeded on holding the reset button for 1s to reset it.
After which, use the default login password to login. kudos to this .community
Hope this solves yours
- Copy Link
- Report Inappropriate Content
@Yomanew If you are facing a problem with reset TP link extender you can try this process press and hold the reset button for 5 sec or until the WiFi LED blinks amber and gree to initiate the app configuration process. To start switch/plug to factory defaults: Press and hold the reset button until the WiFi LED blinks amber rapidly (about 10 sec ) to reset the smart switch to factory defaults.
if you are still facing a problem with the factory reset TP link extender you can follow this process:-
- Make sure the range extender is plugged into a power outlet.
- The power light on the front should be lit solid.
- If the power light is not on, press the power button on the side to turn the device on or the LED button to turn the indicator lights on.
- Locate the pinhole on the side where the reset button is.
- Insert a pin then press and hold the reset button until all indicator lights turn on momentarily.
- The range extender should now be reset to factory default settings.
Hope this will help you to reset the TP-link extender.
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-20.png)
Hello everyone,
Here is a configuration guide and some great tips to help you set up your TP-Link range extender, please give it a try and let us know if it works for you.
TP-Link Range Extender Setup (Range Extender Mode)
Factory Reset Your Extender Before Reinstallation
- RESET: With the extender powered on, use a pin to press the RESET button (pinhole) until all the LEDs flash once.
Related Articles:
Has connected to TP-Link extender but no internet, what can I do?
What should I do if I fail to configure TP-Link Range Extender?
How to place your wireless Range Extender for optimal reception and performance?
- Copy Link
- Report Inappropriate Content
Hello,
We received a new modem and I am having trouble reconfiguring the TPlink extender. None of the advice works here for me.
My extender just keeps flashing the big round wifi button and the 5GHz middle button blue, with the LAN cable socket flashing two small green lights.
I know the extender works as it was working up until yesterday when we changed to the new modem. The internet connection works well.
Is there any way to do a hard reset? The reset button on the side doesn't seem to do anything.
Thanks.
- Copy Link
- Report Inappropriate Content
![](/avatar/default.png)
Information
Helpful: 46
Views: 152640
Replies: 11
Voters 0
No one has voted for it yet.