VR600 Disconnects every few minutes for a few seconds when connected with cable.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I just got a new VR600.
When connected with cable it disconnects every few minutes for a few seconds. This doesn't happen with my old modem/router.
I replaced the cable. I tried without VPN. I restarted everything. The problem persists.
The wifi works without blemish.
Please advise.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, for your issue, we would like to confirm the below information first.
The wired connection from the Router has dropping internet issue, but the wireless connections from the router works well, right?
May I know how the wired connection is recovered? Automatically OR restarting the router?
May I know which line is connected to the router? It is DSL line OR Ethernet cable? Do you have the NBN box in your home?
May I know the lights' status on the router?
When the issue happens, can you change another wired device to check if the same issue happens ?
May I know the type of the cable? CAT5e or CAT6? It is suggested to use CAT6 to test.
When the dropping issue happens again on your PC, please follow the instruction to check the IP address, default gateway on the PC.
https://www.tp-link.com/support/faq/838/
BTW, may I know who is your internet service provider?
Can you check the version on the white label printed on the router? It is EU version or AU version?
Your reply would be much appreciated.
Have a nice day!
- Copy Link
- Report Inappropriate Content
@Sunshine Thanks! Answers in red. Waiting for further guidance.
The wired connection from the Router has dropping internet issue, but the wireless connections from the router works well, right? correct.
May I know how the wired connection is recovered? Automatically OR restarting the router? Automatically.
May I know which line is connected to the router? It is DSL line OR Ethernet cable? Do you have the NBN box in your home? To the modem/router DSL. From the modem/router Ethernet. I do not have an NBN box as far as I can tell.
May I know the lights' status on the router? When it works: LAN, internet, wireless 2.4, dsl and power lights are on. When it doesn't: the same just without the LAN, the LAN goes off for a few seconds.
When the issue happens, can you change another wired device to check if the same issue happens ? I can not and I don't think this is the issue since it worked with another modem.
May I know the type of the cable? CAT5e or CAT6? It is suggested to use CAT6 to test. I have no idea. What ever came in the modem the box. I tried also another cable.
When the dropping issue happens again on your PC, please follow the instruction to check the IP address, default gateway on the PC.
https://www.tp-link.com/support/faq/838/ Seems to be the same at both instances. When it drops and when it doesn't.
BTW, may I know who is your internet service provider? Orange parther in Israel
Can you check the version on the white label printed on the router? It is EU version or AU version? EU
- Copy Link
- Report Inappropriate Content
Hello, apologies that we didn't respond timely on this issue.
May I know is the issue persists?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
This issue persists. And I would still like to solve it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you very much for your kind reply.
I would like to forward your case to the senior engineers;
And could you please help me confirm the following details since the post is quite a long time:
When the wired PC lost the connection, did the Lan light still turn off for a few seconds?
Could you please help me get the detailed information about this computer:
- Press WIN+R on the keyboard, type in “cmd” and enter, you will see a small black window.
- In the small black window, type in “ipconfig /all” and press enter, the information of your network adapters will be printed.
- Please copy the whole content of this window while contacting us, this information would be more helpful when troubleshooting this issue.
By the way, Did you have one more Ethernet device for a test?
Thanks.
- Copy Link
- Report Inappropriate Content
CIL in bold.
Thank you very much for your kind reply.
I would like to forward your case to the senior engineers;
And could you please help me confirm the following details since the post is quite a long time:
When the wired PC lost the connection, did the Lan light still turn off for a few seconds?
Not sure. I think it does. The disconnet happends every few minutes so it is hard to notice.
Could you please help me get the detailed information about this computer:
- Press WIN+R on the keyboard, type in “cmd” and enter, you will see a small black window.
- In the small black window, type in “ipconfig /all” and press enter, the information of your network adapters will be printed.
- Please copy the whole content of this window while contacting us, this information would be more helpful when troubleshooting this issue.
I run on linux so I ran ifconfig -a. The results are below.
By the way, Did you have one more Ethernet device for a test?
Yes. I replaced it with an old tplink device (maybe 225) and it works flawlessly so this is not the cable or connection.
Thanks.
enp0s31f6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether e8:6a:64:ec:c9:4c txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0xee300000-ee320000
enx70886b8abcd5: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 70:88:6b:8a:bc:d5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 426146 bytes 266152714 (253.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 426146 bytes 266152714 (253.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::2770:4782:fe96:7a58 prefixlen 64 scopeid 0x20<link>
ether a4:c3:f0:cc:cd:92 txqueuelen 1000 (Ethernet)
RX packets 4617665 bytes 3093768221 (2.8 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4387625 bytes 2593431313 (2.4 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- Copy Link
- Report Inappropriate Content
Hi, for the old TP-Link device(maybe 225), I guess you talked about replacing the VR600 with this router?
How about another wired laptop, windows, or Mac to test whether it would drop the connection as well?
Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1585
Replies: 10
Voters 0
No one has voted for it yet.