Archer mr400 v4 - Beta firmware for band selection
Archer mr400 v4 - Beta firmware for band selection
Hi,
somebody knows if there is a newest version of the beta firmware with band selection for the Archer mr400?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for posting on the TP-Link Community.
There is no beta firmware to select the band manually on the MR400 v4, can you please confirm why do you require this? Is the band or internet connection not stable, or there is any issue with the auto band selection? Please kindly provide as more details as you can, then we will check how to fix it.
Have a nice day.
- Copy Link
- Report Inappropriate Content
Hello @Kevin_Z, thank you answer me.
The only problem i have is for the instable signal. I test with my phone and it can reach better results. Close to my house there many provider that can deliver bands 1, 3, 7 and 20, so i was wondering to make a test just using two of this (3 and 7 for the data capacity).
Thank you again and have a nice day
- Copy Link
- Report Inappropriate Content
It seems you are requiring the Carrier Aggregation feature on the MR400? While MR400 doesn't support it.
Can you please verify the band is switching when the internet drops on the MR400? What is the band before the drop and what is that after? Have you tested the internet connection by connecting a computer to the MR400 with an Ethernet cable directly?
Meanwhile, please check and confirm you have a stable internet when you put this SIM card on the phone or on another LTE router. BTW, who is the SIM card carrier?
- Copy Link
- Report Inappropriate Content
Hi Kevin
Same problem as the original poster. My provider offers Band 3,5 and 40 - Archer MR400 sticks to Band 40 that delivers speeds less than 1Mbps while band 3 and 5 from same LTE tower offers more than 5Mbps DL and UL. I was able to validate this by testing on my mobile phone. Please share the beta Firmware for locking band as soon as possible. Am willing to provide more details if required.
- Copy Link
- Report Inappropriate Content
Hi, Currently, there is no beta firmware available which supports manual band selection;
Later if there is any updated news, I would update here as soon as possible.
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
Thank you for posting on the TP-Link Community.
There is no beta firmware to select the band manually on the MR400 v4, can you please confirm why do you require this? Is the band or internet connection not stable, or there is any issue with the auto band selection? Please kindly provide as more details as you can, then we will check how to fix it.
Have a nice day.
Internet not stable my network lte just support band 3 3 and 7 but the router give me always band 1 no service in band 1 we neeeed frimware with band selection manul@Kevin_Z
- Copy Link
- Report Inappropriate Content
You can find the beta firmware here:
https://community.tp-link.com/en/home/forum/topic/241534
Please verify and install the correct firmware on your MR400 as per its hardware version.
- Copy Link
- Report Inappropriate Content
@Kevin_Z , could this firmware solve my problem:
I am a bargeman and the Archer400 is installed on my ship. I have a dutch internet-contract with Vodafone with roaming accorded. Crossing the Dutch or French border, automatic selection of the provider (mostly Proximus, c.q. SFR) doesn't always give the best connection. Could the Beta firmware give me the possibility to select another provider out of a list of possible providers in the region, where I am? Or is there another possibility to select a better connection? How do I proceed?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4433
Replies: 12
Voters 0
No one has voted for it yet.