Disable OneMesh Hidden SSID on the 3G/4G modem

Disable OneMesh Hidden SSID on the 3G/4G modem

Re:[New Firmware] Disable Hidden SSID on the MR600
2022-06-21 06:39:00

  @Genadz 

 

Hi, did you see any options on the login page on the phone? such as PC version and Phone version? If so, please select PC version to see if you are able to login and if the page will show correctly.

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/
  0  
  0  
#22
Options
Re:[New Firmware] Disable Hidden SSID on the MR600
2022-06-21 09:04:31

Sunshine wrote

please select PC version to see if you are able to login and if the page will show correctly.

Yes, it works.
But on a stable firmware this action was not required to enter the web interface from a mobile device.
OneMesh shutdown changes violated the previous entrance algorithm. Maybe something else is broken.
On the last global firmware, everything works as it should, but there is no way to disable OneMesh.

  0  
  0  
#23
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-07-10 19:29:17

Hello, what about MR200 v5.2?

  0  
  0  
#24
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-07-23 16:39:01

  @Kevin_Z dont you want to release after a year? support is offline? just selling ?

  0  
  0  
#25
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-08-19 01:45:57

  @Kevin_Z @TP-Link 

Hi, I have a Archer MR600 V2.

 

I installed the specific beta firmware and rebooted.

Now I can see the Enable/Disable switch in the OneMesh section.

 

Trying to disable it, it seems it has no effect because I can still see the hidden signals on both 2.4Ghz and 5.0Ghz bands forever.

Only after rebooting the router, it seems taking into account the new setting.

I think it is a bug,

 

After a reboot, if i try to switch on the mesh, after more or less 120 seconds, I can see the signals back again, without rebooting.

So only to disable the mesh it needs a reboot.

 

Another strange thing I noticed is that the reboot button in the upper right corner, actually doesn't reboot! 

I simply logs me out, so I have to log in back again. 

The reboot that works is under the system tools section.

 

But the worst thing I'm noticing is that I cannot connect to the 3G/4G network anymore.

I don't know if it is a coincidence or it depends by the new beta firmware.

I will check again tomorrow.

 

 

Thanks.

Regards.

Daniele

  0  
  0  
#26
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-08-22 20:32:20 - last edited 2022-08-22 20:35:23

  @jdaniele 

I replaced the beta version of the firmware with the latest official one and "magically" my router MR600 started to connect to 4G again.

 

So now I can say that the beta version isn't working.

Please fix it and do an official release.

 

Thanks.

Daniele

 

PS: to the forum administrator: please move my last two messages to the correct thread (for MR600). Thanks.

  3  
  3  
#27
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-10-04 07:07:53

  @Kevin_Z 

 

Hello I trying to upgrade firmware in order to disable hidden network, but I can't install beta firmware.

Can you help me?

 

  0  
  0  
#28
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-10-25 01:53:04

  @angelog 

 

Hi, please try to install the following firmware to see if you could update successfully and also disable OneMesh:

Archer MR600(EU)_V2_220815

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/
  0  
  0  
#29
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-10-25 07:13:02 - last edited 2022-10-25 10:34:59

  @Sunshine Sorry, I updated router firmware and disable OneMesh , but I still see Hidden Wifi 

 

 

 

 

 

 

 

  0  
  0  
#30
Options
Re:Disable OneMesh Hidden SSID on the 3G/4G modem
2022-10-26 02:09:49

  @angelog 

 

Hi, it seems that the WiFi in the list is not a hidden WiFi, please double check if the main WiFi or guest WiFi of your MR600 is still enabled or not.

 

In addition, the OneMesh hidden WiFi will not be able to detect by regular wireless client devices directly unless you use WiFi scanning application such as WiFi analyzer etc.. 

If the main WiFi or guest WiFi of MR600 has been disabled completely and WiFi LED off as well, please try to turn off the MR600 to see if that WiFi still exist.

 

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/
  0  
  0  
#31
Options