hata(pkts)
![](/avatar/avatar-5.png)
my broken vr600 v2 modem was replaced with v3.
However, although the v3 model has the same internet values, the number of pkts increases too much and my internet drops to even lower speeds than 1 mbps. It does not improve until I restart it.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/6a24c137db71447c8bfda2f6b0322df3.jpeg)
Thank you and please refer to the following link for more suggestions:
VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
- Copy Link
- Report Inappropriate Content
EDITED
Hello, have the same exact problem with my Archer VR300
Firmware:1.3.0 0.8.0 v009c.0 Build 201103 Rel.38894n
Hardware: Archer VR300 v1
after 8-12 hour of work the Errors (pkts) count moves from zero and goes wild (after this night was around ~1200000 ).
The speed of download bitrate dramatically start to decrease as well.
The only found solution is to restart the modem or unplug and replug the vdsl cable to reset internet connection.
after a reboot the situation is this one [ full performance in pagespeed (40 mbps down, 7.7 mbps up) ]
After ~12 hours the errors start to spawn and the download rate decreased to 4 mbps download (!!), upload value is the same.
Other Notes:
Am not using any telephone nor dsl filter, just the vdsl cable connect directly to the router.
The problems happens also for my ethernet connected Desktop PC (errors pkts + download speed drammaticaly decreased)... this is definitely not only a WiFi issue.
Can anyone help?
- Copy Link
- Report Inappropriate Content
Did you still have the same issue about the downstream error spike?
If yes, could you please help me check the following information:
1. May I know who is your internet service provider and did you know the specific DSLAM information from the ISP?
2.How often did the speed attenuation/downstream error spike appear?
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks for the update.
The case has been forwarded to the senior engineers already and please have a check of your email box for further assistance.
- Copy Link
- Report Inappropriate Content
I'm having the same problem, could you provide a solution?
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/6a24c137db71447c8bfda2f6b0322df3.jpeg)
Thank you and please refer to the following link for more suggestions:
VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-5.png)
Information
Helpful: 2
Views: 2062
Replies: 8
Voters 1
![voter's avatar](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)