tpPLC looks good but something's wrong
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello guys,
I have a problem with my TL-PA9020P KIT
When I use tpPLC i get nice stats between the 2 plugs (about 800mb/s) but my speed is only 200mb/s
Is this tool doing some mistakes or could I have something slow between the plug and computer / box ?
Thx for help !
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@airforceone11 Hello,
Thank you for the photo! Actually speed will get reduced while signal being transmitted through powerlineand the real speed is closely related to the powerline rate and also the speed coming from router. In the actual household environment, real speed test could be 20% to 30% of the Powerline rate and also capped by router speed. Here is a related FAQ explaining the Powerline Rate and Actual speed of the Powerline Adapters:
https://www.tp-link.com/support/faq/2928/
From thephoto the powerline rate is around 870Mbps, if the real speed is around 200Mbps, it should be the reasonable speed, hope this could help~
- Copy Link
- Report Inappropriate Content
@airforceone11 Hello,
Thank you for the photo! Actually speed will get reduced while signal being transmitted through powerlineand the real speed is closely related to the powerline rate and also the speed coming from router. In the actual household environment, real speed test could be 20% to 30% of the Powerline rate and also capped by router speed. Here is a related FAQ explaining the Powerline Rate and Actual speed of the Powerline Adapters:
https://www.tp-link.com/support/faq/2928/
From thephoto the powerline rate is around 870Mbps, if the real speed is around 200Mbps, it should be the reasonable speed, hope this could help~
- Copy Link
- Report Inappropriate Content
Hello and thx for help. It's clear for me now.
Is there a way to get better or its just like this ? :)
- Copy Link
- Report Inappropriate Content
@airforceone11 Hello,
Sorry for the delayed response, that's pretty much the speed of what the Powerline KIT can get, you could follow this instruction for a better power line environment:
https://www.tp-link.com/support/faq/409/
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 285
Replies: 3
Voters 0
No one has voted for it yet.