Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Bolton-UK Finally I tried and succeeded in updating my four Deco M5 v3 (fr) to 1.7.5 using the web interface. All the Deco have been updated, this update has a very strange behavior in your case.
- Copy Link
- Report Inappropriate Content
Where can i download this for the V3.2 version?
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
I can download for the V3 version.
- Copy Link
- Report Inappropriate Content
@Bolton-UK Nothing to do with your setup. Its to do with TP-Link and how they are rolling it out
- Copy Link
- Report Inappropriate Content
that's odd that I can't update my Deco M5 v3, I do have it in AP mode, Wonder if that has something to do with it?
- Copy Link
- Report Inappropriate Content
@Bolton-UK I've just manually updated mine (V3 EU, in the UK) and they seem to be alright so far. I used the web interface.
- Copy Link
- Report Inappropriate Content
So us with the M5 v3 can't update the firmware even tho on the website it's available to download? Confused
- Copy Link
- Report Inappropriate Content
@David-TP Thanks for the quick reply but its all very confusing to be honest.
- Copy Link
- Report Inappropriate Content
Hi, The 1.7.5 is for the EU version only but actually, it is the same as 1.7.4 for other region codes.
(Deco M5(EU)_V1/V2/V3/V3.2 share the same firmware download link)
I checked the release note of the original 1.7.4 version for the EU version. It mentioned the 1.7.4 version number had been repeatedly requested before which might cause an upgrade failure in certain cases so that a new version number 1.7.5 has been submitted.
In this way, if you plan to manually update the firmware via web UI, it is suggested to use the latest 1.7.5 directly.
PS: I noticed the 1.7.5 hasn't been 100% rolled out and a part of the users will get the firmware notification first.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 233218
Replies: 870
Voters 6
