Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, for the IOT network, you could have a look at this link: What is an IoT Network?
And there is a recent discussion about IOT network:https://community.tp-link.com/us/home/forum/topic/609984
You are right about the WAN/LAN auto-sensing optimization.
@Parushev Actually, I also thought it would be 1.7.0. Please wait for a moment and let me check if there is any further news.
update: the current 1.7.0 of Deco M5 hasn't added VPN features due to the limitation of flash memory. The engineers would re-evaluate the possibilities of this feature later.
The US version will be released later, @CenterInYou Normally the local office updates the firmware every Friday and you could wait for the update on the local website.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, For Deco M9 Plus, since 1.6.0 was just released several weeks ago, I think 1.7.0 might need a while. Currently, I haven't got any news about the beta firmware.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, This version hasn't been fully released. Currently only part of the users would get the APP firmware push message. I think the MAC address of your Deco M5 v3 is randomly chosen as the candidate, and the Deco M5 v1 might still need to wait for the next batch。
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
It sounds that the official statement sent to me via email by tp-link about a year ago (M5 was still on 1.5.7) that the VPN server feature will be implemented with 1.7 firmware line is not true. Having flash memory limitation is a no go for the feature since it is not something software related.
This is very disappointing since I've bought the devices based on this official assurance...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link @David-TP Can I ask when the Deco S4 will be receiving 1.6? I've been waiting an age, and it's been so long the M5 now has 1.7 while the S4 sits without a single update.
I know you have previously mentioned it was in the works, and I know some users on here have managed to make small modifications to existing firmware to get 1.6 to work on their Deco S4, so what's the hold up and why is it taking so long please? If you have dropped support for this model then please say so.
- Copy Link
- Report Inappropriate Content
Hi, could you please change to a different speed test server and check the speed again?
Please also help me check whether Ookla Speedtest APP used the same server 3BB, Bnngkok as Deco APP.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, I am quite upset about the news as well and I am always reluctant to give a response to future plans since it is full of uncertainty. But it is frequently asked around the community. Normally we would say "might" or "plan to be". We knew it actually did not guarantee anything but we need to avoid making an empty promise.
On the brighter side, the engineers haven't said no to VPN features and there might still be a way to get over the flash limitation.
ConcernedUser, Hi, nice to see you again. As for "when", it might not be the answer you want but there hasn't been updated news about the ETA. So far, it is still in the planning and the software engineers would have their own priorities. Deco S4 hasn't been marked as EOL and it is still under support.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
I have a question in regard to IoT network:
I can configure preferred signal source for a client device on Main network.
I can't configure preferred signal source for a client device on Guest network.
What about IoT network?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238682
Replies: 873
Voters 5
