Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, the firmware 1.7.0 has been removed for optimization last weekend and a new version will be uploaded later.
If you have installed the firmware and experienced any issues with this firmware, please feel free to comment here and leave me a message for notification.
Sorry for the inconvenience.
Thanks a lot for your understanding.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP ballpark of how long we have to wait for it to be rerelease?
- Copy Link
- Report Inappropriate Content
I have upgraded to 1.7.0 and have an issue of being unable to connect remotely via the Deco app, and when connected locally an 'unable to check for update' error occurs when looking to see if there is an update to remedy the issue.
I assume this means that when a fix is released I'll need to resort to the manual 'firmware recovery method'?
- Copy Link
- Report Inappropriate Content
Hi, Thank you for the feedback.
If there is one Deco M5 that hasn't been updated to 1.7.0, you could switch this one to the main Deco.
How to Set up the Satellite Deco or a new Deco to be the Main Deco
And if you want to downgrade the firmware back to 1.6.0, please leave me a message. I was informed yesterday that the 1.7.0 firmware could not be downgraded via firmware recovery this time.
@CenterInYou Hi, there hasn't been a clear date about it, but since some users have detected and updated to 1.7.0 already, the engineer needs to figure out a backup plan and speed up the new firmware release.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP what issues did they find in 1.7 and what is the process for downgrade to 1.6?
- Copy Link
- Report Inappropriate Content
I assume it was pulled due to an L2TP issue / scenarios where it can't connect to the cloud or check for updates as a result.
I'm using access point mode, so was not affected by this issue which is why 1.7.0 is working fine for me (and why I wouldn't mind updating my remaining units to 1.7.0 so they all have matching firmware, but I didn't save the file).
I assume/hope that those with a working connection would be able to update from both 1.6.5 and 1.7.0 to the fixed update which hopefully comes out soon, while others might have to update manually when it comes out.
- Copy Link
- Report Inappropriate Content
DeckOh wrote
I'm using access point mode, so was not affected by this issue which is why 1.7.0 is working fine for me (and why I wouldn't mind updating my remaining units to 1.7.0 so they all have matching firmware, but I didn't save the file).
Have you checked Recycle Bin and Download folder? That firmware file might still be there.
- Copy Link
- Report Inappropriate Content
@Alexandre. Oh, I mean I didn't manually save it in the first place (updated through the app with direct download to the units), so I didn't have the chance to download it as a file before it was pulled
- Copy Link
- Report Inappropriate Content
@DeckOh This makes sense for me as I'm also only using them in AP mode.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 236821
Replies: 873
Voters 5
