Official Release Deco M5 1.7.8
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for the feedback.
Here are some suggestions for your reference:
1. Please turn off the Mesh Technology on the Sony smart TV from the Deco APP.
2. Turn off the fast roaming on the Deco APP or manually select connection preference for the TV.
As for the speed delay, could you please provide more details, like how much speed they could get before and after?
Are they all connected to the 5ghz?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Is there a plan to release similar firmware for the Deco S4? I would love to change the source of the signal for one of my Deco.
If it's going to be released, is there an ETA?
Thanks
- Copy Link
- Report Inappropriate Content
Hi, the firmware will be released for Deco S4 as well.
As for the ETA, technical support would not be informed of the exact release date in advance so I am sorry that there is no ETA that could be provided.
- Copy Link
- Report Inappropriate Content
This beta I found 2 problems below ;
1. Monthly report not working and app freezing
2. DynDNS connection Failed
When Official FW 1.6.0 release ?
- Copy Link
- Report Inappropriate Content
Hello, are there any news about 1.6 beta for the Deco M9 Plus?
- Copy Link
- Report Inappropriate Content
@TP-Link When the official firmware v1.6.0 was release for Deco M5 and Deco M9 Plus?
- Copy Link
- Report Inappropriate Content
Hi, could you please provide more details about the mentioned issue, such as some screen-shots about the monthly report and video clips about APP freezing?
As for the DynDNS, did you use DynDNS together with port forwarding to access the LAN serve?
If yes, without DynDNS, are you able to use the WAN: port number to access the server?
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link When will this be available for download in the app? Please update it, I am having a hard time force connecting to other meshes. Thank you!
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Information
Helpful: 14
Views: 227355
Replies: 869
Voters 6
![voter's avatar](/avatar/avatar-5.png)
![voter's avatar](https://static-community.tp-link.com/icon/9eb8e7080f1049cfbff7d60c1cfd305c.jpeg)
![voter's avatar](https://static-community.tp-link.com/icon/ecd216a2993649fcba51dd0f1c05cf88.jpeg)
![voter's avatar](/avatar/avatar-10.png)
![voter's avatar](https://static-community.tp-link.com/icon/034b61c58e5343b68b00f48fbacb9080.jpeg)
![voter's avatar](/avatar/avatar-8.png)