Troubleshooting What if my device failed to detect the 6 GHz Wi-Fi Band
Troubleshooting What if my device failed to detect the 6 GHz Wi-Fi Band
6 GHz is a new frequency band ranging from 5.925 to 7.125 GHz, allowing up to 1,200 MHz of additional spectrum. Unlike the existing bands on which channels are currently crammed into the limited spectrum, the 6 GHz band exists without overlap or interference. It was first introduced to Wi-Fi 6E, and then to the latest Wi-Fi 7 Technology.
Some users might find their phone or laptop is unable to detect or connect to the 6 GHz Wi-Fi network. This article will share some tips & tricks on how to fix network devices not detecting 6 GHz band Wi-Fi signal problems.
1. Ensure the network devices support 6 GHz Wi-Fi
To use the 6 GHz Wi-Fi band, both the router or access point and the network device need to support 6 GHz, otherwise, the device can only see 2.4 GHz or 5 GHz.
Below are some common wireless devices that support 6 GHz radio:
| TP-Link |
|
| Other Brands |
Intel AX210/AX211/AX411 QCNFA765
iPhone15 Pro/Pro Max MacBook Pro (14-inch, 2023) or MacBook Pro (16-inch, 2023) Mac Mini (2023) More Apple devices are getting support 6 GHz band, visit this link for details: https://support.apple.com/en-us/102285.
Samsung Galaxy S21 Ultra & S22 Ultra & S23 Ultra; Galaxy Z Fold 3 & Galaxy Z Flip 3 FireTV Cube Oculus Quest3 Oppo Find X5 Pro
Amazon Fire TV Cube Note: The above list might not include all devices vendors or models that support 6 GHz and there will be more in the future. To make sure that the device is 6 GHz capable, it is recommended to refer to the official website of the end devices or contact the device vendor. |
2. Confirm that 6 GHz has been enabled in the current area.
6 GHz has been adopted in some countries while in other areas, it is still under consideration or strictly prohibited.
Here are some countries that have opened 6 Ghz for reference.
Countries Enabling Wi-Fi 6 GHz—WiFi Alliance
Countries and Areas that opened Wi-Fi 6 GHz--TP-Link Blog
3. Update Your Phone or Driver of your Wi-Fi card.
Given that more devices are newly supported Wi-Fi 6E, it's not surprising that some smartphones or computer Wi-Fi cards need an update to support the 6 GHz Wi-Fi band.
- For mobile devices: check if a software upgrade is required in order to enable 6 GHz.
- For PCs and Laptops: find the model of the Wi-Fi card, and go to the Wi-Fi card manufacturer's website to download and install the latest driver; If you are using Windows, make sure it has been updated to Windows 11.
[Case Sharing] Possible Fix for Intel Wi-Fi Cards: AX210/AX211
Note: Intel Wi-Fi card may have 6 GHz limitations in some areas, thus it's better to reach Intel support first to confirm if the driver has supported 6 GHz in your area.
If your computer is installed with network adapters using Intel Wi-Fi 6E AX210/AX211 (like TP-Link PCI-E adapter TXE75E), here are some other fixes (approved to be working by some of our customers) that might help:
-
Try the older driver of 22.45. X for your intel AX210
Here is a post from the Intel community that shared the older 22.45.1.1 driver and the method of reinstalling the driver.
4. Put your network device closer to the Router or Access Point
The wireless signals of higher frequencies decrease faster along the propagation paths, especially through obstacles. 6 GHz Wi-Fi band can be more susceptible to physical interference like walls. If your device cannot see 6 GHz Wi-Fi, locate the client device or router closer to each other and remove the obstructions between them.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey @Solla-topee
If your device is failing to detect the 6 GHz Wi-Fi band, there are a few factors to consider:
-
Device Compatibility: First, ensure that your device is compatible with the 6 GHz Wi-Fi band, commonly known as Wi-Fi 6E. Not all devices, even if they support Wi-Fi 6, are capable of connecting to this newer frequency.
-
Router Configuration: Verify that your router is broadcasting the 6 GHz band. This might require enabling the band in your router’s settings. Check the router's firmware as well, as an update may be necessary to properly support 6 GHz.
-
Interference and Range: The 6 GHz band has a shorter range compared to 2.4 GHz and 5 GHz bands and may be more sensitive to obstacles. Ensure you're within range and that the signal isn’t blocked by walls or other obstructions.
-
Driver and Firmware Updates: Ensure that your device’s drivers are up-to-date. Manufacturers often release updates that improve connectivity and support for new technologies, including Wi-Fi 6E.
-
Data Storage Considerations: If you're managing large amounts of data storage and relying on fast network access, leveraging the 6 GHz band can significantly enhance transfer speeds and reduce latency. However, if your device can’t access this band, you may want to explore other high-performance storage options that don’t solely rely on Wi-Fi, such as direct-wired connections or utilizing NAS with higher bandwidth availability.
If these steps don't resolve the issue, it might be worth contacting the device manufacturer for additional support or considering hardware that fully supports Wi-Fi 6E for your data storage needs.
- Copy Link
- Report Inappropriate Content
Thanks for sharing this detailed info, it's super helpful for anyone trying to figure out why their devices aren't picking up the 6 GHz band. A lot of people forget that both the router and the device need to support 6 GHz, and even then, local regulations and outdated drivers can make a difference.
The point about driver updates and physical obstructions is spot on. I’ve personally seen older drivers on Windows 11 block access to 6 GHz even though the card technically supports it. Also, being too far from the router definitely affects detection, especially through walls.
Appreciate the organized breakdown with practical tips—it clears up a lot of confusion!
- Copy Link
- Report Inappropriate Content
@Solla-topee Would you tell me how does the Router recognizes the Country it is working in and how it decides not to broadcast the 6 Ghz signal based on that information ?
Thank you!
- Copy Link
- Report Inappropriate Content
Para llamar a 𝔼𝕩𝕡𝕖::𝕕𝕚𝕒 desde México, puedes usar el número de atención al cliente 52 (80) 0351 0300. También puedes llamar al 1-888`-𝔼𝕩𝕡𝕖::𝕕𝕚𝕒 para asistencia en tu idioma. Si necesitas comunicarte en español, llama al 1-888 𝔼𝕩𝕡𝕖::𝕕𝕚𝕒o al 1-888-331-3976. Para obtener el número específico para México, puedes consultar la página de ayuda de 𝔼𝕩𝕡𝕖::𝕕𝕚𝕒o el sitio web de 𝔼𝕩𝕡::𝕖𝕕𝕚𝕒 México.
- Copy Link
- Report Inappropriate Content
If your device isn’t detecting the 6 GHz Wi-Fi band, make sure it actually supports Wi-Fi 6E, as older devices can’t use that band. Also, check if your router has the 6 GHz band enabled in its settings. Sometimes, updating your device’s drivers or firmware can help fix the issue for too
- Copy Link
- Report Inappropriate Content
BenHeinz1 wrote
TP-Link AXE5400 - Archer AXE75 WIFI 6E Router
I found my problem to be in router configurations!
1) Make sure you have latest Intel driver installed (ie. 22.180.0.4 )
2) Make sure SSID is not Hidden under wireless 6ghz settings and shows up in WIFI internet list in task bar, might have to shut WIFI off and on a few times or reboot system till yours show up!
3) Channel width: 20/40/60/80/160Mhz
4) Enable OFDMA
5) Make sure to uncheck PSC box under wireless 6ghz settings, this reserves only higher channels for connection!
6) Disable WPS
Should connect immediately with WPA3 encryption!
Hey @BenHeinz1 !
Could you please help me ?
I followed all steps but nothing changed. As I have the TP Link AXE5400 - Archer AXE75 WiFi 6E Routeur, my iPhone (A3084) and my Samsung S24 FE (SM-S721BZACMEA) still cannot connect and find the 6 GHz in Madagascar.
Unfortunately, my laptop just have Intel AX1650x 160 MHz Wireless Network adapter (200NGW).
- Copy Link
- Report Inappropriate Content
Hello @TsiorySullivan ,
First of all , please confirm that your area already supports 6GHz.
Then, please check that both your router and client device are being used in a country or region where Wi-Fi 6E/7 operation is allowed. If the router and client device were purchased in different countries, the 6GHz band may not be available due to regional restrictions.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 29180
Replies: 17
Voters 1
