Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine need firmware for Archer MR500 VR5.0
- Copy Link
- Report Inappropriate Content
I'm using a TL-MR 100 and jio 5g sim is not working in that.Could you send me the beta version or a firmware update for my device.
- Copy Link
- Report Inappropriate Content
Please let me know whether users are able to read SMS on Jio 5G working models ?
- Copy Link
- Report Inappropriate Content
Hi, there is no beta firmware for MR400 yet, and beta firmware will be provided for newer version MR400 V4.20 and V4.30, please pay attention to the solution update of this thread.
In addition, for Jio SMS issue, I am afraid it will still not work since it requires VoLTE enabled, refer to this thread: Can’t send and receive SMS on TP-Link 4G Routers with Jio SIM card
If other Jio users are using 5G Jio SIM at this moment with TP-Link working routers, please share with us your testing results.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Regarding the MR100, please refer to this reply: https://community.tp-link.com/en/home/forum/topic/604130?replyId=1241170
- Copy Link
- Report Inappropriate Content
@Sunshine when we can expect the beta version of MR400 V4.30 ?
- Copy Link
- Report Inappropriate Content
I'm using MR200.
There is no luck even updating the isp and firmware. However we get rid of Ambani's bumper offer.
Wait until your recharge is expired.
Keep your sim in 4g phone only. And recharge the sim and ensure that no unlimited 5g is given to you.
By doing this my router is working fine.
Don't try to keep the sim in any 5g devices
- Copy Link
- Report Inappropriate Content
Here i cant find any solution for MR 100@Sunshine
- Copy Link
- Report Inappropriate Content
Information
Helpful: 49
Views: 124842
Replies: 463
Voters 7
