Beta Software Deco M4/S4_V2 Support Connection Preference
This Article applied to
Deco M4_V2_1.5.8
Deco S4_V2_1.5.1
Download Link:
Deco M4_V2 | Deco M4_V2_1.7.0 ( New version updated on 2024.3.7) |
Deco S4_V2 | Deco S4_V2_1.6.1_build_20240328 (updated on 2024.4.19) |
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. For Deco M4_V2, the firmware downgrade(back to the official 1.5.8 version) needs to be implemented via firmware recovery.
3. For Deco S4_V2, it would revert to the official 1.5.1 directly via web UI.
4. How to update the firmware via web UI.
Firmware Modifications:
Deco M4_V2_1.7.0 |
|
Deco S4_V2_1.5.1 |
|
Please feel free to comment below if you have any issues with these two firmware versions!
Related Articles:
Connection Preference: Customize Your Preferred Signal Source
Understand the Differences Among Deco Firmware Platforms
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
No, it is not necessary. You should be able to update to the 1.7.0 beta directly from the official 1.6.2. Firmware Recovery is only needed when you plan to downgrade from 1.7.0 to 1.6.2.
Best regards.
- Copy Link
- Report Inappropriate Content
Hello David,
I have noticed recently that after restarting my DECO's - MAIN M5(3.2) 1.7.8 Build 20240719 Rel. 70981 with three Satellite S4(2.0) 1.6.2 Build 20240718 Rel. 69205 - that the Connection Preference screen is clearly available for a minute or so after reboot under each connected device and I can navigate the options in the screen, all DECO's are available within the selector screen, I can select the Preferred Deco I want, save it and it shows as saved (in the shot below the main M5 is the living room and the connected device is saved to one of the S4 V2's) the Deco moves that device to the relevant S4 but then after a minute or so when you click back out to home screen and back into devices the Connection Preference option is magically gone again and the functionality is hobbled once more. This infers the functionality is there in code but is removed via config shortly after reboot. This is extremely frustrating given how much back and forth there has been around this. Can you please get a proper answer from your dev teams as to what this means and why that functionality is clearly there, functions but is then removed shortly after reboot. I think we'd all appreciate an honest answer here at this stage.
Thank you
- Copy Link
- Report Inappropriate Content
@David-TP Life is getting very boring with this pain, when will the stable update come.....?
- Copy Link
- Report Inappropriate Content
Would love the option to disable DHCP in AP mode for the M4R V3.0 is that available somwhere?
- Copy Link
- Report Inappropriate Content
@David-TP is deco m4_v2 1.7.0 stable comming? How long we will have to wait?
- Copy Link
- Report Inappropriate Content
@David-TP Please let us know when will receive the official release, those of us who have the M4 as an access point, need to be able to disable DHCP, this is 100000% necessary because it is failing, we cannot let months go by without answers to customers, we are losing confidence in the brand....
- Copy Link
- Report Inappropriate Content
@Adrz yes right i can't confidence tp link
- Copy Link
- Report Inappropriate Content
@kaisarturan yes wait for that's.
- Copy Link
- Report Inappropriate Content
@David-TP
Hello, can I please get a response to the below.
thanks
TP-no-Link wrote
Hello David,
I have noticed recently that after restarting my DECO's - MAIN M5(3.2) 1.7.8 Build 20240719 Rel. 70981 with three Satellite S4(2.0) 1.6.2 Build 20240718 Rel. 69205 - that the Connection Preference screen is clearly available for a minute or so after reboot under each connected device and I can navigate the options in the screen, all DECO's are available within the selector screen, I can select the Preferred Deco I want, save it and it shows as saved (in the shot below the main M5 is the living room and the connected device is saved to one of the S4 V2's) the Deco moves that device to the relevant S4 but then after a minute or so when you click back out to home screen and back into devices the Connection Preference option is magically gone again and the functionality is hobbled once more. This infers the functionality is there in code but is removed via config shortly after reboot. This is extremely frustrating given how much back and forth there has been around this. Can you please get a proper answer from your dev teams as to what this means and why that functionality is clearly there, functions but is then removed shortly after reboot. I think we'd all appreciate an honest answer here at this stage.
Thank you
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for your time and patience.
Deco S4_V2_1.6.2 Build 20240718 Rel. 69205 still doesn't support "Connection Preference" yet. I think it is due to the APP cookies that you could configure this feature temporarily.
It is quite like the issue reported here:https://community.tp-link.com/en/home/forum/topic/612014?replyId=1217126
If you want to manually set the Connection Preference for Deco S4_V2, it is still suggested to install the beta firmware first.
Thanks again and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 38227
Replies: 231