Beta Software Deco M4/S4_V2 Support Connection Preference
This Article applied to
Deco M4_V2_1.5.8
Deco S4_V2_1.5.1
Download Link:
| Deco M4_V2 | Deco M4_V2_1.7.0 ( New version updated on 2024.3.7) |
| Deco S4_V2 | Deco S4_V2_1.6.1_build_20240328 (updated on 2024.4.19) |
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. For Deco M4_V2, the firmware downgrade(back to the official 1.5.8 version) needs to be implemented via firmware recovery.
3. For Deco S4_V2, it would revert to the official 1.5.1 directly via web UI.
4. How to update the firmware via web UI.
Firmware Modifications:
| Deco M4_V2_1.7.0 |
|
| Deco S4_V2_1.5.1 |
|
Please feel free to comment below if you have any issues with these two firmware versions!
Related Articles:
Connection Preference: Customize Your Preferred Signal Source
Understand the Differences Among Deco Firmware Platforms
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@SayeemAhmed You mean to change channel width? 20Mhz 40Mhz or 80 Mhz ?
- Copy Link
- Report Inappropriate Content
@ARGamingPK1 no it’s auto selected channel but didn’t have width select i have issue this firmware 1.7.0 updated than facing the rang throughout issue.
- Copy Link
- Report Inappropriate Content
@David-TP Look port 53 is not opened until WAN cable is not connected and when i connect WAN cable so it takes 2-3 minutes to get ip address from main ISP modem and then port 53 will come back and then i can able to access internet but i was not facing this issue on previous version 1.6.2 or 1.61 or 1.5.8 but this beta firmware 1.7.0 is not good.
- Copy Link
- Report Inappropriate Content
I'm really impressed by the fact TP-Link seems to be (finally) alive in the process of fixing years long issues (better calling it "lack of basic functions").
After months spent waiting for answers I just wanna thank all the company because it strongly pushed me in the friendly hands of Mikrotik.
Anyway I just want to encourage you to produce a finally stable and decent firmware version so that I could sell my 3 M4 on ebay without having to hear complains from the buyer about the misfunctioning paperweights.
Have a nice day
- Copy Link
- Report Inappropriate Content
@David-TP would older devices also support this new features soon? I own 3 E4 (v1), and would like to have those features too. Thanks
- Copy Link
- Report Inappropriate Content
Hi, There is a plan to add similar features to other models but I'm afraid there hasn't been any ETA for Deco E4 yet.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, what is the plan for 1.7.0 stable release date ?
- Copy Link
- Report Inappropriate Content
@David-TP okay thanks for the reply. Is it also possible to add an ootiob to separate the 2.4ghz and 5ghz wifi signal? It is an option most routers have, as well as that of openwrt.
- Copy Link
- Report Inappropriate Content
@David-TP Any plans for M4 users have the option to select a fixed WAN port and solve all the WAN auto-sense problems?
- Copy Link
- Report Inappropriate Content
Hi, there is a plan to add this feature to other models. But no ETA for a specific model. Deco X50/X55_V1 will be the first model to support this feature.
OpenWRT is unlikely to be added to Deco. Neither does separate the 2.4ghz and 5ghz Wi-Fi signals.
One of the reasons for the IOT network is to offer a separate 2.4GHz SSID.
Hi, the official version of 1.7.0 might still need a while. So far, I haven't seen any ongoing release process for it.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 39201
Replies: 233
Voters 3
